JVC HR-XVS20AA, LPT0762-001B manual Another Video Recorder, Advantages of S-VHS video recorders

EN 69

Edit To Or From

Another Video

Recorder

A
TV receiver	Player	Your unit
	S-video cable
		Audio/video
		cable
Audio/video cable
Video
channel or
AV mode	Another recorder
	Recorder
B TV receiver	Recorder	Your unit
	S-video	Audio/video
	cable	cable
Audio/video cable
Video
channel or	Another recorder
AV mode
	Player

Advantages of S-VHS video recorders

You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS.

●From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to S-VHS: All signals will be transferred with minimum degradation.

You can use your unit as the source player or as the recording deck.

Slide the TV/S-VHS/DVDswitch to the right.

A Make connections.

AWhen using your unit as the source player ...

... connect its AUDIO/VIDEO OUT or AUDIO/S VIDEO OUT connectors to the audio/video or audio/S-video input connectors on another recorder.

BWhen using your unit as the recording deck ...

... connect its AUDIO/VIDEO IN or AUDIO/S VIDEO IN connectors to the audio/video or audio/S-video output connectors on another recorder.

B Select the S-VHS deck.

On the unit

Press S-VHS/DVDrepeatedly so that the S-VHS indicator lights up.

On the remote control

Press S-VHSso that the S-VHS indicator lights up.

C Set the input mode of recording deck.

With this video unit, press AUX (number key “0”) and/or PR to select “L-1” for the AUDIO/VIDEO IN connectors, or “S-1” for the AUDIO/S VIDEO IN connectors, depending on the connector being used.

●When using another recorder as the recording deck, refer to its instruction manual.

D Set the edit mode.

See “PICTURE CONTROL” on page 77.

E Start the source player.

Engage the Play mode of the source player.

F Start the recording deck.

Engage the Record mode of the recording deck.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step D, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

●When you use this unit as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting. ( pg. 78)

●It is also possible to use the front AUDIO/VIDEO or AUDIO/S-VIDEO input connectors for the connection. When you use the front connectors, select “F-1” for the AUDIO/VIDEO input connectors, “S-2” for the AUDIO/S-VIDEO input connectors in step C.

IMPORTANT

●To edit, both the player and the recorder must be of the same colour system. Select the appropriate colour system. ( pg. 77, 78)

●For more information on multi-system compatibility, refer to

“Information on Multi-System Compatibility (S-VHS deck only)” ( pg. 88)