Filename [XVS20AG_09Editing.fm]
Masterpage:Left0
68 EN
Page 68 April 9, 2003 6:18 pm
EDITING (S-VHS DECK)
Edit From A
Camcorder
You can use a camcorder as the source player and your
unit as the recording deck.
AMake connections.
AIf the camcorder has no S-VIDEO output connector:
— connect the camcorder’s AUDIO OUT and VIDEO
OUT connectors to the unit’s front panel AUDIO and
VIDEO input connectors.
BIf the camcorder has an S-VIDEO output connector:
— connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the unit’s front panel
AUDIO and S-VIDEO input connectors.
●When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
●When a Master Edit Control-equipped JVC camcorder is used, the
camcorder is capable of controlling the unit. Refer to the camcorder’s
instruction manual for operating procedure.
BSelect the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
CSet the unit’s input mode.
Press AUX (number key “0”) and/or PR to select “F-1” for
the AUDIO and VIDEO input connectors, or “S-1” for the
AUDIO and S-VIDEO input connectors, depending on
the connectors being used.
DSet the edit mode.
See “PICTURE CONTROL” on page 77.
EStart the camcorder.
Engage the Play mode of the camcorder.
FStart the unit.
Engage the Record mode of the unit.
NOTES:
●All necessary cables can be obtained from your dealer.
●When you select “EDIT” to dub tapes in step D, be sure to select
“AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish
dubbing the tapes.
AIf the camcorder has no S-VIDEO output connector:
BIf the camcorder has an S-VIDEO output connector:
Recorder
AUDIO OUT
VIDEO OUT
Camcorder
AUDIO input
Player
VIDEO
input
Video cable (not provided)
Recorder
Audio cable (not provided)
S-VIDEO OUT
AUDIO OUT
Camcorder
S-VIDEO input
Player
AUDIO input
S-Video cable (not provided)
Audio cable (not provided)
EDIT
Mini-plug cable
(not provided)
(JVC camcorder
only)
To PAUSE
connector
Mini-plug cable
(not provided)
(JVC camcorder
only)
To PAUSE
connector
EDIT
Slide the TV/S-VHS/DVD switch to the right.
IMPORTANT
●To edit, both the player and the recorder must be of the same
colour system. Select the appropriate colour system. (墌pg. 77,
78)
●PAL, SECAM and NTSC camcorders can be used as a player for
editing.
●For more information on multi-system compatibility, refer to
“Information on Multi-System Compatibility (S-VHS deck only)”
(墌pg. 88)
XVS20AG_09Editing.fm Page 68 Wednesday, April 9, 2003 6:18 PM