EDITING (DVD DECK)

EN 71

Digital Audio

Dubbing

Turn on the TV and select the video channel (or AV mode).

Slide the TV/S-VHS/DVDswitch to the right.

Recorder

Digital audio device (MD deck etc.)

Optical cable (not provided)

Player

Rear of unit

DIGITAL AUDIO OUT

Note for connection: Remove the connector cover from the unit and remove the protection cap from the cable.

You can dub selected audio from the DVD or Audio CD disc to a MD etc.

However, it is not possible to dub the copy-protected disc.

Example: Dubbing to a MD

A Make connections.

Connect the optical cable between the unit and the digital audio device.

B Place a disc and load a MD.

For the DVD deck

APress x on the DVD deck to open the disc tray.

BPlace the disc in the disc tray.

CPress x on the DVD deck to close the disc tray.

For the digital audio device

Insert a MD.

C Prepare the DVD deck for dubbing.

APress DVD and select the audio to be dubbed.

BSearch for the point where you want to start dubbing by pressing 4, 5 or 3 then press 8.

CPress 3 a little, then press 4 to start playback.

DPress 9 to pause playback a little before the start point.

D Prepare the audio device for dubbing.

Select the input mode.

E Start dubbing.

APress 4 to start playback on the DVD deck.

BStart recording on the audio device.

F End dubbing.

Stop recording on the audio device. Then press 8 to stop playback on the DVD deck.

NOTES:

There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO OUTPUT” to “PCM ONLY”. ( pg. 81)

Page 71
Image 71
JVC HR-XVS20AA, LPT0762-001B manual Digital Audio Dubbing, Place a disc and load a MD, Prepare the audio device for dubbing