JVC HR-XVS20AA Placing a Disc, Care and Handling of Discs, Open the disc tray, Place the disc

EN 7

Placing a Disc

1Open the disc tray.

Press x on the DVD deck to open the disc tray.

●Pressing the button again closes the disc tray.

●Do not block the disc tray with your hand while it is opening or closing as this may result in hardware failure.

●Do not place unplayable discs or any object other than a disc in the disc tray.

●Do not press down strongly on the disc tray or place any heavy objects on it.

2Place the disc.

Place the disc in the disc tray with the label side facing up.

● Since disc size changes depending on the disc to be played back, be sure to correctly align the disc with the grooves for its size. If the disc is not in its groove, it may be scratched or otherwise damaged.

●To insert an 8 cm disc, place it according to the inner groove.

Care and Handling of Discs

How to handle discs When handling a disc, do not touch the surface of the

disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped,

the images and sound will not be picked up correctly,

and such a disc may cause the unit to malfunction.

Label side

Do not damage the label side, stick paper to or use any adhesive on its surface.

Storage

Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car!

Maintenance of discs

If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the center outwards. If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any anti-static agents.

CAUTION

Sometimes during playback, noise or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.)

These symptoms are caused by the discs, not by the malfunction of the unit.