JVC HR-XVS20AA Choose a programme, Set the tape speed, Start recording, Pause/Resume recording

EN 27

Basic Recording

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/S-VHS/DVDswitch to the right.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The unit’s power comes on automatically and the counter is reset to 0:00:00.

B Select the S-VHS deck.

On the unit

Press S-VHS/DVDrepeatedly so that the S-VHS indicator lights up.

On the remote control

Press S-VHSso that the S-VHS indicator lights up.

C Choose a programme.

Press PR +/– or the number keys to select the channel you wish to record.

D Set the tape speed.

Press SP/LP/EP (p). The current setting appears on the front display panel or TV screen. Press SP/LP/EP (p) again to change the setting while the tape speed is displayed on the TV screen.

●Select the appropriate colour system with “PAL/MESECAM” and “NTSC”. ( pg. 77, 78)

E Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the unit.

B.E.S.T. takes place at the beginning of both the first SP and the first LP (or EP) recording after inserting the cassette. ( pg. 30)

F Pause/Resume recording.

Press 9. Press 4 to resume recording.

●You can select channel during the Record Pause mode.

G Stop recording.

Press 8. Then press x on the S-VHS deck to remove the cassette.

NOTES:

●S-VHS recording is possible only for PAL signals recorded in the SP or LP mode, or NTSC signals recorded in the SP mode. S-VHS recording is impossible for NTSC4.43 signals.

●S-VHS ET recording is possible only for PAL signals recorded in the SP mode, or NTSC signals recorded in the SP mode.

●When recording in NTSC, if EP is selected, recording will always be done in the VHS mode even if an S-VHS cassette is used.