How to know when you need new supplies
How to know when you need new supplies
The following sections describe ways to determine when new supplies are needed.
Checking the toner and photoconductor levels
You can determine approximately how much toner is left in your cartridge and how full the photoconductor is by printing a menu settings page. This helps you decide when you might need to order replacement supplies. For help printing a menu settings page, see How to print the menu settings and network setup pages on page 85.
The Toner low light sequence (see page 63) is displayed when the toner cartridge is nearly empty. You can still print for a short time while this sequence is displayed, but print quality begins to decrease as the toner level decreases.
Note: The Toner low light sequence does not appear if the
When the toner light sequence appears, or when you experience faded print, remove the toner cartridge. Firmly shake it side to side and front to back several times to redistribute the toner and reinsert it. Repeat this procedure multiple times. If the print remains faded, replace the toner cartridge.
To ensure print quality and to avoid damage to the printer, the printer stops operating after the photoconductor has reached a maximum of 40,000 pages. (See Replace photoconductor (printer hard stop)* on page 91 for the light sequence associated with this stop.) The printer automatically notifies you before the photoconductor reaches this point.
When you first receive the “Replace photoconductor kit” light sequence, you should immediately order a new photoconductor kit. While the printer may continue to function properly after the photoconductor kit has reached its official
90
