Operator panel codes
Replace photoconductor (printer hard stop)
Light sequence:
•Continue—On
•Toner Low/Replace PC Kit—Blink
•Error—Blink
What this light sequence means:
The photoconductor kit is full and needs replacing. The printer will not print any more pages until the photoconductor kit is replaced.
What you can do:
Replace the photoconductor kit. (See How to change a photoconductor kit on page 96 for help.)
Unsupported toner cartridge / Toner cartridge is not installed
Light sequence:
•Toner Low/Replace PC
•
What this light sequence means:
The toner cartridge is not installed, or the printer detects a toner cartridge error.
What you can do:
•If the toner cartridge is not installed, install it.
•If the toner cartridge is installed, remove it and install a new toner cartridge (see How to change a toner cartridge on page 92).
65
