Lexmark 240n manual Setup menu, USB menu, Parallel Mode

Configuration menus overview

Setting	Use this setting to	Values
Parallel Mode 2	Determine whether the parallel port	•	Off
	data is sampled on the leading (On) or	•	On*
	trailing (Off) edge of strobe.
Mac Binary PS	Configure the printer to process	• Off—The printer filters PostScript print jobs using
	Macintosh binary PostScript print jobs.		standard protocol.
		• On—The printer processes raw binary PostScript print
			jobs from computers using the Macintosh operating
			system. This setting often causes Windows print jobs
			to fail.
		• Auto*—The printer processes print jobs from
			computers using either Windows or Macintosh
			operating systems.
* Factory default

Setup menu

Use the Setup menu to configure how the printer formats the end of a line depending on the computer system being used.

Setting	Use this setting to	Values
Auto CR after LF	Specify whether the printer automatically performs a carriage return after a	•	Off*
	line feed control command.	•	On
Auto LF after CR	Specify whether the printer automatically performs a line feed after a	•	Off*
	carriage return control command.	•	On

* Factory default

USB menu

Use the USB menu to change printer settings on jobs sent through a Universal Serial Bus (USB) port.

Setting	Use this setting to	Values
NPA Mode	Send print jobs to the printer and query	•	Off
	printer status information simultaneously.	•	On
		•	Auto*
Mac Binary PS	Configure the printer to process Macintosh	• Off—The printer filters PostScript print jobs using
	binary PostScript print jobs.		standard protocol.
		• On—The printer processes raw binary PostScript print
			jobs from computers using the Macintosh operating
			system. This setting often causes Windows print jobs
			to fail.
		• Auto*—The printer processes print jobs from
			computers using either Windows or Macintosh
			operating systems.
* Factory default

83