Configuration menus overview
Network menu
Use the Network menu to change printer settings on jobs sent through a network port (either Standard Network or Network Opt <x>).
Setting | Use this setting to | Values | |
NPA Mode | Send print jobs to the printer and query | • | Off |
| printer status information simultaneously. | • | Auto* |
|
|
| |
Mac Binary PS | Configure the printer to process Macintosh | • | |
| binary PostScript print jobs. |
| standard protocol. |
|
| • | |
|
|
| print jobs from computers using the Macintosh |
|
|
| operating system. This setting often causes |
|
|
| Windows print jobs to fail. |
|
| • | |
|
|
| computers using either Windows or Macintosh |
|
|
| operating systems. |
|
|
| |
Set Card Speed | Automatically detect the connection speed | • | |
| of your network. You can disable this |
| speed. |
| setting to set the speed manually. | • 10Mbps†, Half | |
|
|
| to connect to the network only at 10Mbps, Half |
|
|
| Duplex. |
|
| • 10Mbps, Full | |
|
|
| connect to the network only at 10Mbps, Full |
|
|
| Duplex. |
|
| • 100Mbps, Half | |
|
|
| to connect to the network only at 100Mbps, Half |
|
|
| Duplex. |
|
| • 100Mbps, Full | |
|
|
| to connect to the network only at 100Mbps, Full |
|
|
| Duplex. |
|
|
|
|
* Factory default |
|
|
|
† Megabits per second |
|
|
|
|
|
|
|
Parallel menu
Use the Parallel menu to change printer settings on jobs sent through a parallel port.
Setting | Use this setting to | Values | |
NPA Mode | Send print jobs to the printer and | • | Off |
| query printer status information | • | On |
| simultaneously. | • | Auto* |
|
|
|
|
Protocol | Receive information at a much higher | • | Standard |
| transmission rate if your printer is set | • | Fastbytes* |
| to Fastbytes (if your computer |
|
|
| supports Fastbytes), or receive |
|
|
| information at a normal transmission |
|
|
| rate if your printer is set to Standard. |
|
|
|
|
|
|
* Factory default |
|
|
|
|
|
|
|
82
