JVC XL-R5000BK Play the sound of the source to be recorded, To record silence in the recording

4 When analog signals are to be recorded, adjust the recording level.

• Adjust the volume in such a way that

REC LEVEL

the 0 dB display is not exceeded when the loudest sound is supplied.

	L
	40	30	20 15 10	6	3	0 dB
	R
MIN	MAX

The OVER indicator should not be made to light as this may cause distortion in the recording.

5 Play the sound of the source to be recorded.

•If the CD1 button is pressed when CD serves as the source, the tracks are recorded in the following sequence:

CD1 = CD2 = CD3

6 Press the 3 (play) button to start recording.

When recording is complete

Press the 7 (STOP) button to stop, the 3 indicator flashes and operation stops.

Note

•When UNLOCK appears in the display, the OPTICAL IN con- nector is not connected to the source unit.

•Upon completion of recording, the 3 indicator flashes. Operat- ing any button while this indicator flashes may render the disc unusable. Always wait until the 3 indicator stops flashing before proceeding with the next operation.

•When digital input signals are supplied, they will be recorded in their original digital form. There is no need to adjust their recording level.

To record silence in the recording

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER	REC LEVEL
MIN		MAX
MIX BALANCE		PHONES LEVEL

	MULTI JOG
STANDBY
–	+
POWER
PITCH +	1,2

		PITCH 0
1,2			REC	1,2
	SHIFT	PITCH –	REC MUTING

REMOTE CONTROL

RM-SXLR5000J

1While the CDR is recording, press the REC MUTING button on the main unit (or press REC ¦/REC MUTING while the SHIFT button is pressed down on the remote control) to start recording silence .

2Release the REC MUTING button. After four seconds of silence has been recorded, the unit is put in the record pause mode.

Notes

•Four seconds of silence is recorded even if the button is held down for less than four seconds. Even if the button is held down for longer than four seconds, the unit is put in the record pause mode after the button is released.

•REC MUTING cannot be used at the beginning of a recording from the record pause mode

Setting automatic or manual track marking

When automatic track marking is turned on, tracks are automati- cally set in the recording. For digital sources, the track information recorded in the digital source signal is used. For analog recording, spaces of silence are interpreted as track separations. For analog recording, automatic track marking is performed when the unit detects 4 seconds of silence in the recording.

Manual track marking offers the flexibility to place track marks anywhere in your recording.

To turn on automatic track marking

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER	REC LEVEL
MIN		MAX
MIX BALANCE		PHONES LEVEL

			MULTI JOG
STANDBY
POWER		–	+
CANCEL4,6	2	3,5

CD REC	SYNCHRO	DISPLAY POWER
CD EDIT	FINALIZE	MENU

				CD 1	2
	1	2	3
				CD 2
	4	5	6
				CD 3
	7	8	9
			CONTROL		1
	10	+10	CD	CDR
4,6	PLAY MODE REPEAT		SET	CANCEL	CANCEL
		PITCH +
2		PITCH 0		REC	3,5
	SHIFT	PITCH –		REC MUTING

REMOTE CONTROL

RM-SXLR5000J

1Press CD-R on the remote control while pointing at the unit to select the CDR function.

2When the unit is in the stop mode, press the MENU button on the main unit (or the DISPLAY/MENU button on the remote control while holding down the SHIFT button).

3Turn the MULTI JOG dial or press the 4/¢ button on the remote control until “AUTO TRACK” appears in the display.

4Press the SET button.

•The current setting is displayed on the screen. (The setting is on by default.).

5Turn the MULTI JOG dial or press the 4/¢ button on the remote control to select “AUTO TR ON”.

6Press the SET button.

•If “AUTO TR ON” is selected, the AUTO TRACK indicator lights in the display.

•Press the CANCEL button to cancel the procedure and return to the normal display.

19