JVC XL-R5000BK manual CD Changer to CDR Recording Options

5 Select and enter the program source.

MULTI JOG SET

1. Select the source.	2. Enter the Selection
=CD1 +=CD2 +=CD3 +

•The source can be selected in either direction using the MULTI JOG dial on the main unit or the 4 and ¢ buttons on the remote control.

•When the SET button is pressed, the programming and track number flash.

6 Select and enter one of the tracks.

MULTI JOG SET

1. Select the track. 2. Enter the Selection

•After the track is entered, the amount of time remaining on the CD-R or CD-RW appears in the display followed by the infor- mation for the next step in the program.

7 Repeat steps 5 and 6 to continue programming tracks.

•Up to 32 tracks can be programmed. The same track may be programmed more than once.

•The Program Edit mode is stopped if 32 steps have been pro- grammed or if there is no more time remaining on the CD-R or CD-RW.

8 Press the CDR CONTROL 3 button to start recording the program.

•Recording starts from the first step in the program, and stops when the last step is finished.

•The program information is maintained in memory until one of the disc trays (CD1, CD2, CD3) is opened.

When recording is complete

After “STOP DUBBING” is displayed, operation stops automati- cally. It also stops automatically after the last step in the program is finished.

To stop recording at any time

Press the 7(stop) button.

The recording mode is released after “STOP DUBBING” is dis- played.

Note

•If the source CD being recorded from the 3-CD changer is itself a digital copy, digital recording cannot be performed. When this occurs, the recording type will switch automatically from digital to analog.

•The last program information (the most recently created pro- gram still stored in the unit's memory) will be erased if the trays of the 3-CD changer are opened and if listening Edit recording is performed.

3-CD Changer to CDR Recording Options

There are a number of advantages of having a 3-CD changer and CDR in the same unit, mainly that the unit has direct control over both components. Because of this, the following recording options are available: high-speed (2x) recording and track spacing.

Setting the unit to perform high-speed recording

High-speed (2x) recording is only possible for digital recording

from the 3-CD changer to the CDR.

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER	REC LEVEL
MIN		MAX
MIX BALANCE		PHONES LEVEL

			MULTI JOG
STANDBY
POWER		–	+
CANCEL 4	2	3,5

CD REC	SYNCHRO	DISPLAY POWER
CD EDIT	FINALIZE	MENU

			CD 1	2
1	2	3
			CD 2
4	5	6
			CD 3
7	8	9
		CONTROL		1
10	+10	CD	CDR
PLAY MODE	REPEAT	SET	CANCEL

4 CANCEL

PITCH +

		REC	3,5
2		PITCH 0
	SHIFT	PITCH –
		REC MUTING

REMOTE CONTROL

RM-SXLR5000J

1 Press the CDR button on the remote control

while pointing at the unit to select the CDR function.

2 When the unit is in the stop mode, press the MENU button on the main unit (or the DISPLAY/ MENU button on the remote control while holding down the SHIFT button)

3 Turn the MULTI JOG dial or press the 4/¢ button on the remote control until “DUB- SPEED” appears in the display.

4 Press the SET button.

•The current setting is displayed on the screen. (The setting is 2X by default.)

23