Synchronized Start Recording of External Components

Perform synchronized start recording of sources such as DAT and CD connected to either the DIGITAL IN OPTICAL connector or LINE IN (REC) connectors on this unit. Recording is automati- cally started when the unit detects audio signal input.

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER

REC LEVEL

 

 

MIN

MAX

 

 

MIX BALANCE

PHONES LEVEL

 

MULTI JOG

 

 

STANDBY

 

 

 

+

 

 

POWER

 

 

 

1

7

2

 

CD REC

SYNCHRO

DISPLAY POWER

CD EDIT

FINALIZE

MENU

2

 

 

CD 1

1

2

3

 

 

 

 

CD 2

4

5

6

 

 

 

 

CD 3

7

8

9

 

 

 

CONTROL

10

+10

CD

CDR

PLAY MODE

REPEAT

SET

CANCEL

 

PITCH +

 

7

PITCH 0

 

 

 

REC

PITCH –

 

REC MUTING

SHIFT

 

 

REMOTE CONTROL

RM-SXLR5000J

1 Press the REC SOURCE SELECTION button

repeatedly to select an input source.

2 Press the SYNCHRO button (or the SYNCHRO/ FINALIZE button on the remote control).

The unit is put in the record pause mode, the SYNCHRO indi- cator lights in the display.

For this procedure to work, playback of the source component should be stopped.

3 Start playing the source component

When performing synchronized recording of a digital source

Recording is started based on the digital signal.

Track marking is based on track information recorded in the digital signal. (CD, MD, DAT only.) For other digital sources, track marking is based on spaces of silence.

When performing synchronized recording of an analog source

Recording is started when the unit detects an audio signal.

Track marking is based on spaces of silence which the unit interprets to be track breaks. If automatic track marking has been turned off, manual track marking is necessary.

When recording is started, the “SYNCHRO” indicator disappears from the display.

To stop recording at any time

Press the 7(stop) button.

When recording external sources

Synchronized recording (other that synchronized start record- ing) cannot be used to record an external source (connected to DIGITAL IN OPTICAL or LINE IN (REC)). During synchro- nized recording, this unit is put in record pause after the end of each recorded track, and adjusts the blank between tracks to be uniform. Because this unit is not capable of predicting or adjust- ing the blank between the source tracks in the input signal, the blank between tracks that are recorded will be identical to those of the source.

Normally, manual recording is recommended for recording an

external source (connected to DIGITAL IN OPTICAL or LINE IN (REC)). Even if synchronized start recording is used, record- ing will continue until there is no remaining time left on the CD being recorded*. For this reason, when recording an external source, be sure to press CDR CONTROL 7to stop recording or CDR CONTROL 8 to put this unit in record pause mode when the source you are recording is finished.

*When an MD player is connected to DIGITAL IN OPTICAL, this unit is put in record pause when MD playback is stopped or paused.

Notes

Please note that if “AUTO TRACK” is set to “AUTO TR ON”, track numbers are automatically assigned even with external sources.

When the external source is a CD, MD or DAT player con- nected to the DIGITAL IN OPTICAL connector on this unit, this unit can automatically start and stop recording if a single track is recorded. For more information, see “Setting Up Syn- chronized Recording for External Digital Sources” on page 31.

CAUTION

When performing synchronized start recording of an external com- ponent, there is a chance that a section at the beginning of the source signal will not be recorded. When this occurs, please per- form manual recording.

25

Page 30
Image 30
JVC XL-R5000BK manual Synchronized Start Recording of External Components, Start playing the source component