JVC XL-R5000BK manual Program Edit Recording, Press the CDR Control 3 button to start recording

Load CDs in the 3-CD changer.

When the first track has been stored in memory

					Remaining recording time on a
Play time of second track					CD-R or CD-RW (pre-calculated)
	2	3	4	5
CD PLAYER							SYNCHRO
LISTENING EDIT	6 7	8	9	10	DIGITAL	REC HIGH SPEED AUTO TRACK
CD REC					44.1kHz	CD-R
						L–		40	30	20	15	10 6 3 0 dB
						R

“1” is cleared from the music calendar.

Note

•When there is not much recording time left on the CD-R or CD- RW, tracks that are longer than the remaining time (pre-calcu- lated) can be programmed but “NO REM” appears in the dis- play.

When the last programmed selection is in the memory

Press the CD EDIT button to display “LAST L-PG OK?”. If you want to record the programmed tracks in the memory, press the 3 or SET button. If you want to program a new selection of tracks, press the CANCEL button.

5 Press the CDR CONTROL 3 button to start recording.

•If “SHORT REM OK?” appears in the display, it may not be possible to record the programmed selection. During actual recording, this unit checks the actual remaining recording time before the beginning of each programmed selection. If that selection cannot be recorded in its entirety, it will not be recorded. Press CDR CONTROL 3 to start recording. Press “CANCEL” to restart the programming procedure.

•Only the tracks on the CD that were selected are recorded.

When recording is complete

After “STOP DUBBING” is displayed, operation stops automati- cally. It also stops automatically when play of the last CD finishes.

To stop the recording at any time

Press the 7 (stop) button. The recording mode is released after “STOP DUBBING” is displayed.

Notes

•There is no need to adjust the recording level (for a digital recording).

•Up to 32 tracks can be included in the programming. The same track cannot be programmed twice.

•Upon completion of recording, “STOP DUBBING” is dis- played. Always wait for “STOP DUBBING” to be cleared before proceeding with the next operation.

•The last program information (the most recently created pro- gram still stored in the unit's memory) will be erased if the trays of the 3-CD changer are opened and if Program Edit recording is performed.

Program Edit Recording

This type of recording allows you to make a program of your favor- ite tracks on any of the CDs loaded in the 3-CD changer in any order you like. Similar to program playback, you can even choose to use program playback information for this type of recording.

3 1 2

XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER	REC LEVEL
MIN		MAX
MIX BALANCE		PHONES LEVEL
MULTI JOG
STANDBY
POWER

		–	+
4	4,5,6	5,6		8

1

2 Load a recordable CD-R or CD-RW in the CDR tray.

3 Press the CD EDIT button twice on the main unit (or the press the CD REC/CD EDIT button while holding down the SHIFT button on the remote control) to select the Program Edit mode.

Main Unit	Remote Control
	CD REC
CD EDIT	CD EDIT
	SHIFT

•The unit is put in the record pause mode and “PROGRAM EDIT” appears in the display.

•At this time, if it is necessaly, the unit is reading the track and time information (called the TOC, or Table of Contents) on each of the loaded discs and “TOC READING” displays.

4 If you have already programmed the tracks on the discs using program Edit, “LAST P-PG OK?” appears in the display. Press the 3 or

SET button to use the stored program information and proceed to step 8. To create a new program for recording, press the CANCEL button.

•If you press the CANCEL button, the remaining time followed by the program step information appears in the display.

22