While Play is flashing, press the SET button | JVC XL-R5000BK

8 While “PLAY” is flashing, press the SET button

SET

9 Turn the MULTI JOG dial to set the function to CD or CDR.

10Press the SET button.

•This display appears when the DAILY TIMER play mode is set.

SET

DAILY

The timer programming is

displayed once, and then the function display is restored.

•When “REC” flashes, turn the MULTI JOG dial until “PLAY” flashes.

11Turn the power to standby.

The present time now appears in the display window.

Notes

•Timer functions cannot be performed if the unit is on when the set time arrives. Make sure that the unit is put in standby for timer functions to operate.

•Match the connected receiver or other source with the unit’s set- ting, and adjust the volume to the appropriate level. Match the timer with the unit’s timer setting.

•Timer play starts at the programmed start time, and the power is switched to STANDBY at the programmed end time.

Clearing a timer operation

Press the CLOCK/TIMER button, select the timer mode, and press the CANCEL button. “DAILY OFF” or “ONCE OFF” appear in the display, the DAILY 3 (or ONCE 3) indicator is cleared, and the timer operation is also canceled.

Timer Recording (unattended recording of the sound from a broadcast receiver or other component)

4
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER	REC LEVEL
MIN		MAX
MIX BALANCE		PHONES LEVEL
MULTI JOG

STANDBY
POWER		–	+
POWER
5	2,3	2,3

1 Perform steps 1 to 7 of the procedure described

in “Timer Play (wake-up play)” on page 34.

2 While “PLAY” is flashing, turn the MULTI JOG dial to select “REC?” and press the SET button.

MULTI JOG	SET

3 Turn the MULTI JOG dial to select the sound source to be recorded, and press the SET button.

SOURCE DIG: Optical digital input

SOURCE LINE: Line input (analog)

SOURCE MIC: Mic input (analog)

MULTI JOG			SET

4 Load a recordable CD-R or CD-RW in the CDR. 5 Turn the power to standby.

The present time now appears in the display window.

35

Image 40

JVC XL-R5000BK manual While Play is flashing, press the SET button, 11Turn the power to standby, Clearing a timer operation

Contents

XL-R5000BK For U.S.A If in Doubt Consult a Competent Electrician For Canada/pour le Canada Class Laser Product Reproduction of Labels Except for Canada & USA No obstructions, place on the level surface Table of Contents Precautions Features InstallationCleaning the cabinet Disc care Connections Selecting the Mode switch positionAnalog Connections Digital Connections OUT Optical Names of the Parts Main Unit Remote control sensor CLOCK/TIMER buttonCD Control operation buttons CD Edit Display Window Remote Control Installing the batteries Using the Remote ControlHow to use the remote control correctly Power ON/STANDBY Operations Turning the power on and putting in standbyTo turn on the power To put the power to standby Listening to CDs Using the Remote Control to Control Playback CDR Playback Operations Forward and Reverse Search Direct Playback from a Specific TrackPress the number buttons of the track you want to hear During normal play mode Skipping TracksRepeat Playback During program and random play modes To release the random play mode To adjust the pitch of the source CD during playbackRandom Playback CD Playback Pitch Control Program Playback Select and enter one of the tracksInsert CDs that contain tracks to be Programmed Press the SET button Program playback using the remote control Select and enter the track Recording onto CD-R and CD-RW Manual RecordingRead through this section before recording Select one of the recording sources Setting automatic or manual track marking Play the sound of the source to be recordedPress the 3 play button to start recording To record silence in the recording Synchronized Recording of 3- CD Changer Playback To add track marks manuallyPerforming synchronized one-button recording of a full CD Select and stop the CD to be recorded Listening Edit Recording To stop recording at any time When the first track has been stored in memory When the last programmed selection is in the memoryProgram Edit Recording Press the CDR Control 3 button to start recording CD Changer to CDR Recording Options Setting the unit to perform high-speed recordingRepeat steps 5 and 6 to continue programming tracks Setting the auto track spacing function Synchronized Start Recording of External Components When recording external sourcesStart playing the source component Mixed Input Recording Select two recording sources to be mixed and recordedStart playback of the sources to be recorded Press the CDR Control 3 button to start the recording Skipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a track or tracks Erase function Erasing all the tracks Disc Erase function Finalization Load a CD-RW into the CDR deck Press the SET button again to confirm the operation Current setting appears in the display Resetting the Unit to Factory Default Settings Cancel 3,4 Setting the Clock Setting the Present Time Timer Operations Timer Play wake-up play Clearing a timer operation 11Turn the power to standbyWhile Play is flashing, press the SET button Page What is Compu LINK? Accessory connecting cablesCompu Link Function Automatic source selection CD and CDR Messages Message Significance Remedy CD-ROM Disc Disc FullTNO Full Cannot REC Restriction on Copying Digital Material Scms Serial Copy Management System Troubleshooting Main Specifications 110 127