Program playback using the remote control
CD REC | SYNCHRO | DISPLAY POWER |
CD EDIT | FINALIZE | MENU |
|
|
| CD 1 |
|
1 | 2 | 3 |
|
|
|
|
| CD 2 |
|
4 | 5 | 6 |
|
|
|
|
| CD 3 |
|
7 | 8 | 9 |
|
|
|
| CONTROL |
| |
10 | +10 | CD | CDR |
|
PLAY MODE REPEAT | SET | CANCEL | 3,4,5 | |
2 | PITCH + |
| ||
7 |
|
|
| 4,5 |
| PITCH 0 | REC | ||
SHIFT | PITCH – | REC MUTING |
| |
|
|
|
REMOTE CONTROL
1 Load the CDs whose tracks are to be
programmed into the
2 Press the PLAY MODE button while the unit is in the CD stop mode to select PROGRAM.
•“PG NO PROGRAM” appears in the display when no program has been made.
3 Press the SET button.
•“PG S01 CD1 1” is displayed. For details on the meaning of this display, see step 3 on the previous page.
4 Select and enter the program source.
SET
1. Select source | 2. Press this button |
=CD1 += CD2 += CD3 +
•When the SET button is pressed, the programming step and track number flash.
5 Select and enter the track.
SET
1. Select the track. | 2. Press this button. |
6 Repeat steps 4 and 5 (this procedure can be repeated for up to 32 tracks).
7 Press the 3 button to start program play.
•Operation stops automatically when all the programmed tracks have been played.
To return the program mode to the normal status in the stop mode
Repeatedly press PLAY MODE on the main unit or remote control until the play time appears in the display window.
Main Unit |
| Remote Control |
PLAY | PLAY MODE | |
MODE |
|
17