HP Jornada Setting Tone or Pulse dialing type, Changing the information printed at the top of the faxes you send, Fax, Fax, Click, Click, Dialing, Click the, Tone Dial

Changing the information printed at the top of the faxes you send

When you first installed the HP OfficeJet software, you were asked to enter your name and fax number. This information was stored for use in the header that’s printed at the top of all of your outgoing faxes.

Notes:

●Only the fax recipient will see this information upon receipt of your fax; it’s not printed on your original document.

●The Telephone Consumer Protection Act of 1991 requires that, in the U.S., all outgoing faxes identify the originator’s name and fax number in a header, footer, or on the cover page of the outgoing fax.

Use the following procedure to change the fax header information.

1Double-click HP OfficeJet Manager on your Windows desktop.

2Click Fax and select Send Settings.

3Click the Personal Information tab and change the information in the two entry boxes in the Fax Header Content section.

Setting Tone or Pulse dialing type

The HP OfficeJet is factory-set for tone dialing. Nearly all phones being used in the U.S. have tone dialing.

Note: Don’t change this setting unless you know your phone isn’t capable of tone dialing. Pulse dialing is much slower than tone dialing.

1Double-click HP OfficeJet Manager on your Windows desktop.

2Click Fax and select Send Settings.

3Click the Dialing tab and select Tone Dial or Pulse Dial in the Phone Dialing Type section.

Faxing .3

3-17