Shared line with external modem (Case ADGI)

If you connected the HP OfficeJet to a shared phone line (receives both voice and fax calls) that also has an external modem connected to it, then use this connection diagram.

Up Setting .1

Phone optional,

External

Telephone

but recommended

modem

wall jack

Connect your external modem to the HP OfficeJet. Find the phone cord that goes from the back of your external modem to a wall jack. Disconnect the cord from the wall jack and plug it into either of the two ports on the back of the HP OfficeJet labeled, “To Phone, Answering Machine, or Modem.”

Important: If your external modem’s software is set to automatically receive faxes to your computer, turn off that setting; if you don’t, your HP OfficeJet will not be able to receive faxes prop- erly.

Connect your phone to the HP OfficeJet. Connect the cord from your phone to either of the two ports on the back of the HP OfficeJet labeled, “To Phone, Answering Machine, or Modem.”

With this setup, you will need to receive faxes manually; the HP OfficeJet will NOT answer incoming calls automatically. To receive a fax manually: When the phone rings, pick it up and listen for fax tones; if you hear fax tones, press the START button on the HP OfficeJet, then hang up the phone. Refer to “Manually

receiving faxes” on page 3-8 for more information.

Continue with Step “8. Install the Software - REQUIRED!”

1-15