HP 610, 600 manual Shared line Case Adgj

●After you install the software in Step 8, and answer the Setup Wizard questions for this connection case, here’s how you’ll automatically receive faxes with the HP OfficeJet: Your fax line will ring once, then the HP OfficeJet will answer and begin emitting fax tones to the sending machine.

●Continue with Step “8. Install the Software - REQUIRED!”

Shared line (Case ADGJ)

If you connected the HP OfficeJet to a shared phone line (receives both voice and fax calls) that has no other office equipment connected to it, then use this connection diagram.

1. Setting Up

Phone optional,	Telephone
but recommended	wall jack

●Connect your phone to the HP OfficeJet. Connect the cord from your phone to either of the two ports on the back of the HP OfficeJet labeled, “To Phone, Answering Machine, or Modem.”

●With this setup, you’ll need to receive faxes manually; the HP OfficeJet will NOT answer incoming calls automatically. To receive a fax manually: When the phone rings, pick it up and listen for fax tones; if you hear fax tones, press the START button on the HP OfficeJet, then hang up the phone. Refer to “Manually receiving faxes” on page 3-8 for more information.

●Continue with Step “8. Install the Software - REQUIRED!”

1-13