●Remove the black print cartridge from its packaging. Peel off the clear blue tape covering the ink nozzles, then place the black print cartridge into the cartridge holder on the left and push it forward until it snaps into place. Again, try not to touch the ink nozzles or copper contacts.

●Close the HP OfficeJet’s cover.

Note: If the print cartridge holder moves out of sight before you finish inserting both print cartridges, close the cover all the way, then open it again; the holder comes back into view. To prevent ink from drying and clogging the nozzles, the holder returns to the parked position after a few minutes.

6.Load the Paper Supply

Now it’s time to load blank paper into the paper supply tray. First, a quick description of the parts of the paper/document tray:

 

Paper extension - Use this extension

 

to support the paper.

 

Paper supply tray - Use this tray to

 

load blank paper or a stack of enve-

 

lopes.

 

Single-envelope tray - Use this tray

 

to print on a single envelope.

 

Document loading tray - Use this

 

tray to load your original documents

 

print-side away from you and top-

 

Pull up the paper

Pull the

extension

 

Document

Load blank paper

loading tray

into the paper

completely

supply tray

forward

 

●The paper supply tray is factory set for letter- and legal-size paper. If necessary, adjust the left paper guide by pinching and sliding it to fit your paper.

1-6