HP 600, 610 manual There were no

This keypad

message:

Has this meaning:

And this action is

recommended:

No fax answered	There were no	Check to make sure you faxed
	answering fax tones at	to the correct number, then try
	the receiving fax	sending the fax again.
	machine.	If the recipient needs to
	Or the phone cord may	receive faxes manually, you
	not be properly	may need to call to notify the
	plugged in.	recipient that you’re sending a
		fax.
		Also, check to see if the
		phone cord is properly
		inserted to both the HP
		OfficeJet and the wall jack.
No group send	You have begun real-	Use the dialing instructions in
	time dialing, and you	the “Speed dialing” on page
	entered a speed dial	3-4.
	code that’s been
	assigned to a group of
	fax numbers.
	In this situation, faxing
	to a group is not
	allowed.
Off hook...	You pressed the Start	Begin dialing the fax number
	button, and this gives	to send a fax using the real-
	you a dial tone so that	time dialing method.
	you can begin real-time	For step-by-step, illustrated
	dialing to send a fax.	instructions, refer to “Dialing
		in real time” on page 3-3.

Phone off-hook	You lifted the receiver
	of a phone that’s
	attached directly to the
	HP OfficeJet, and you
	have a dial tone.

Begin dialing a phone or fax call at any time.

7-14