Document guides

Sending a Paper Document

To fax a paper document, load the document in the document tray, then either dial from the keypad, or select Fax from the Document Assistant.

Note: You may want to use the scan/copy sleeves provided to protect fragile or damaged original documents or photos for faxing. For more information regarding these sleeves, refer to “Using a Scan/Copy Sleeve to Protect Your Original” on page 2-3.

Sending from the keypad

1Load your document top down in the document

tray, and with the printed side facing away from you. You can load up to 20 pages, or a single scan/ copy sleeve.

If necessary, slide the document guides on the tray to the left or right to adjust them for the width of your document.

Note: Always remove staples and paper clips from your original before faxing to avoid equipment damage.

2Dial the fax number on the HP OfficeJet’s keypad.

Note: When entering the fax number, be sure to include all the numbers you would enter if you were dialing the number from a phone. (For example, enter 1 and the area code for long- distance calls.)

3Press the Start button to begin faxing.

To cancel a fax in progress, press the Stop button on the HP OfficeJet’s keypad.

These related topics are described later in this chapter:

Resolution and Contrast settings are described under “Controlling how your faxed documents will look” on page 3-9.

Redialing instructions are under “Redialing a fax number” on page 3-13.

3-2