Samsung SNB-3000(P)  Verify the settings in the following sequence, Analysis setting, Generated

PROBLEM		SOLUTION
No JPEG file is transferred via FTP/	 Verify the settings in the following sequence:
SMTP on occurrence of intelligent		A. NTP must be properly configured.
video analysis event of camera		B. The <Intelligent Video Analysis> should be set to <Enable>.
even when the <Intelligent Video		C. Alarm Video Transmission must be enabled.
Analysis> is set to <Enable>.		D. Check for scheduling conflict.
Can <Set Rules> be configured	 Yes, it can be. You can set rules for events despite of the intelligent video
even when the <Intelligent Video		analysis setting.
Analysis> is set to <Disable>?
No signal is found at the Alarm
Output port even when an		Check alarm output port settings.
intelligent video analysis event is
generated.
Cannot record into the SD memory	 Check if the memory card is defective.
card.	 Check if the write protection tab of the memory card is set to “Lock”.
SD memory indicator does not	 Check if the memory card is defective.
turn on even when the SD memory		Check if the <SD Card Record> is checked in <Setup> - <Event> -
card is inserted.		<Alarm image> menu.
SD memory card is inserted but		Check if the memory card is inserted in the proper direction. Operation
		of memory card that is formatted by other devices is not guaranteed
the camera does not operate		with this camera unit
properly.		Format the memory card again in <Setup> - <Event> - <Record
		setup> menu.
Cannot format the SD memory	 Check if the write protection tab of the memory card is set to "Lock".
card.

ixdn ● Appe

English _87