Activation time : Sets the operation time of the intelligent video analysis.
-Always : Configured action is performed whenever an intelligent video analysis event occurs.
-Only scheduled time : Configured action is performed when intelligent video analysis event occurs during the specified time period.
Action : You can configure the action for an intelligent video analysis event.
-Alarm output : Sets the alarm output port for the signaling the intelligent video analysis event.
-Output duration : Sets the alarm signal dwell time to the Alarm Output port on an intelligent video analysis event.
When another intelligent video analysis event follows the previous one, the output duration time is reset based on the most recent event.
-Alarm image transfer : If selected <Enable>, depending on your setting of <Event> - <Transfer setup>, the image in JPEG format will be sent to the registered address via FTP or
To set the scheduled transfer
You can set to transfer the JPEG image to the FTP/SMTP server saved in the SD memory card at a specific interval.
1.Select <Event> - <Schedule>.
The Schedule Transfer setup window appears.
Schedule transfer function :
If selecting <Enable>, the schedule transfer function will be activated; if selecting <Disable>, it will be deactivated.
Transfer interval : You can set the time interval to transfer images.
You can set the unit of the interval to <seconds> or <minutes>; you can also set to transfer one image per 5/15/30/45/60 seconds, or one per 5/15/30/45/60 minutes.
Activation time : You can set a time to execute a specific command when a sched- ule transfer event occurs.
-Always : Always sends an image at the set interval.
-Only scheduled time : Periodically transfers image only during the specified time period.
2.When done, click [Apply]. Your settings will be saved.
n ee cr p S●tuSe
English _65
