Samsung SNB-3000(P) user manual To configure the IP settings

Target bitrate : Transfers video signal at a specified bit rate.

Compression : Adjust the compression rate from 5 through 100 by 5.

Encode priority : Set the video transfer method to Frame rate or Quality.

GOP* size : Select a GOP size between 5 and 15.

Deblock : This will soften the edges between macro blocks.

De-interlace : You can reduce the grid noise by using the de-interlacing function. Only available if MPEG4 resolution is set to 4CIF.

J  If the WDR is set to <OFF> or the MPEG4 resolution is not 4CIF, you cannot enable the MPEG4 CODEC’s de-interlacing

Profile : Select Baseline or Main for the H.264 profiling method.

Entropy coding* : Reduces the compression loss due to encoding.

J  If you set the profile to Baseline, the entropy coding is available only for CAVLC*; if you set it to MAIN, the entropy coding is available for both CAVLC* and CABAC*.

Motion estimation : Estimates the movement of pixels by determining the motion vector.

Input gain : You can set the audio input gain from 0 to 10.

Output gain : You can set the audio output gain from 0 to 10.

J  If the audio input gain is set to 0, no sound is heard.

2.When done, click [Apply]. Your settings will be saved.

To configure the IP settings

1.Select <Basic> - <IP>.

The IP setup window appears.

IP configuration : Set the IP and port settings for the camera.

-IP type : Select one from <Static IP>, <Dynamic IP>, and <PPPoE IP>.

If you select <PPPoE IP>, you can provide the optional ADSL IP and password. However, the multicast items (multicast address, port, TTL) for VNP and RTP will disappear.

n ee cr p S●tuSe

English _51