Differently with each other | Samsung SNB-3000(P) specification

setup screen

-MAC address : Displays the Ethernet MAC address. This is used for creating a DDNS address.

-IP address : Displays the current IP address.

-Subnet mask : Displays the <subnet mask> for the set IP.

-Gateway : Displays the <gateway> for the set IP.

-DNS server : Displays the DNS(Domain Name Service) server address.

-HTTP webserver port : HTTP port used to access the camera via the web browser. The default is 80(TCP).

-Upload port (TCP) : Used to upgrade the software firmware, defaulted to 60004(TCP).

IPv6 configuration : Obtains the IPv6 address to access the IPv6 network.

VNP configuration : Set a port used to transfer video signals with the Samsung protocols.

-Device port (TCP) : Used to control the video signal transfer, defaulted to 60001(TCP).

-TCP streaming port : Video signal transfer port using TCP protocols, defaulted to 60002(TCP).

-UDP streaming port : UDP Port used to transfer video signal with the UDP Unicast protocols. The default is 60003(UDP).

-Multicast address : IP address used to transfer video signal with the UDP Multicast protocols.

The default is 225.128.1.128, and if you want to change the address, specify it ranging from 224.0.0.0 to 239.255.255.255.

-Multicast port : UDP Port used to transfer video signal with the UDP Multicast protocols. The default is 60005(UDP).

-TTL* : Set the TTL for the VNP packet.

The default is 63, and if you want to change the address, specify it ranging from 0 to 255.

RTP configuration : You can set the RTP protocol.

-RTSP port : You can set the RTSP port.

-Streaming port : Used to transfer video signal with the RTP protocols. The default range is between 61000 and 61999.

-Multicast address : IP address used to transfer video signal with the RTP protocols.

-Multicast port : Used to transfer video signal with the RTP-protocol multicasting.

-TTL* : You can set the TTL for the RTP packet.

2.When done, click [Apply].

Your settings are saved and the system restarts. The currently opened web browser will be closed.

M	 If the IP router has more than one camera connected, you should configure IP and port settings
	differently with each other.

52_ setup screen

Image 52

Samsung SNB-3000(P) user manual Differently with each other

Contents

Network Camera Overview English Overview FCC Statement Important safety instructions Contents Web viewer Setup screen Appendix Precautions Installation and Use Product Features CPU Pentium4 / 2.4GHz or higher Compatible Poe Switches What’s IncludedCompatible Ip Routers Lens Options At a Glance Front Side Rear Side PowerSystem GND Disconnect the power before proceeding Mounting the lensMounting the CS lens Mounting the C lens Connecting the Auto Iris Lens connector FocusingInserting/Removing an SD Memory Card Inserting an SD Memory Card What is a memory card? Slot when releasedMemory Card Information not included Removing an SD Memory Card Contacts Lock Switch Memory Card UseMemory Card Components Sdhc Connecting with Other Device Connecting to the monitorPower Supply Network Connection Connecting to Audio Input/Output MicrophoneLINE-IN LINE-OUT Speaker Pre-Amp Audio I/O Block Diagram Network Alarm I/O Wiring Diagram Connecting to the I/O port box3 4 How to use the menu key You can configure the camera settings using the Web Viewer Factory Defaults  System Info  Profile Camera SET  Privacy Zone Camera ID Camera SetupIris Motion DNRShutter SENS-UP DAY/NIGHT White BAL DAYNIGHT / NIGHTDAY If set to Any excessively bright area in a night scene will be masked Digital Zoom DetailAGC Color SUP Reverse Zone Setup SettingSelect Point You will see dots on the screen Factory Default OthersOSD Color You can set the font color of the user interface Signal LanguageYou can check the system information You can select a language to your preference Network connection and setup Download and upgrade with the latest S/W version available Network connection and setup Select Status from the Settings menu of the IP Router Setting the IP Router Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LAN Buttons used in IP Installer IP Address SetupURL Static IP Setup Manual Network SetupAuto Set Support this function Will be adjusted according to the Http port value Auto Network Setup Http//192.168.1.20110000 Dynamic IP Setup Dynamic IP Environment Setup Port Range Forward Port Mapping Setup Manual Port Range Forwarding Connecting to the camera from a shared local Connecting to the camera from a remote PC via the InternetAddress bar of the Internet browser Ex http//mfffe42.websamsung.net Connecting to the camera Using URLConnecting via URL If the Http port is other than Normally, you would Administrator ID, admin, is fixed and can not be changed LoginTo check the Ddns address Installing ActiveX For Windows XP Service Pack 2 usersPopup setting as follows Current siteA Using the Live Screen Backup To capture the snapshot To record a video To print out the screenshotClick on the scene to record Web viewer Using ThE Sd SEARCh Viewer Screen Sd Search Viewer Screen layout Accessing the Setup screen Default SetupTo configure the video & audio settings  Contrast Adjust the contrast from To configure the IP settings Differently with each other Click Basic User User setup window appears To set the user account To set the display language When done, click Apply Selected language will be appliedClick Basic Language To set the date/time PC time configuration settingsTo time To check the log information To update the softwareSelect system log Log information list appears To reset the system To set the Https Overlay Setup To Set IP FilteringTo set the text Form of https//CameraIP Event Setup To set the event transfer functionProvider To test the FTP transfer Click Test Setup screen To setup the record To set an alarm image To set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer To set the video transfer mode Network SetupTo set the Ddns DAY Mode ALCLens Level Backlight Night Burst Cavlc Terminology Bitrate Control CBRConstant Bitrate English Specifications CS/C RAMDSP 4CIF Setup HTTPS, SSL, DhcpARP, DNS, DDNS, Vsip Ddns Http API NtscSDK  Test Condition Mjpeg ResolutionCIF, Quality1, Frame rate1 Frame Rate NtscMPEG4 4CIF EstimationHPel 264 4CIF MPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL Kbps 16 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Problem Solution  Verify the settings in the following sequence NTP must be properly configuredAlarm Video Transmission must be enabled Analysis setting GNU General Public License Preamble GPL S/W  Lgpl S/W Program, and can be reasonably Page Page No Warranty GNU General Public License Terms and Conditions You must show them these terms so they know their rights Basic Permissions Source CodeProtecting Users Legal Rights From Anti-Circumvention Law Conveying Verbatim Copies Conveying Non-Source FormsPage Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesPatents Use with the GNU Affero General Public License Disclaimer of Warranty GNU Lesser General Public LicenseLimitation of Liability END of Terms and Conditions Preamble Page AThe modified work must itself be a software library Page Page Page No Warranty OpenSSL License No Event Shall the OpenSSL Original SSLeay License