Samsung SNB-3000(P) user manual Setting the IP Router

Select : <Network Neighborhood>  <Properties>  <Local Area Connection>

<Properties>  <General>  <Internet Protocol (TCP/IP)>  <Properties>

<Obtain an IP address automatically> or <Use the following IP address>.

Follow the instructions below if you select <Use the following IP address>: ex1) If the address (LAN IP) of the IP router is 192.168.1.1

IP address: 192.168.1.100

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.1

ex2) If the address (LAN IP) of the IP router is 192.168.0.1 IP address: 192.168.0.100

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1

ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1 IP address: 192.168.xxx.100

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.xxx.1

M  For the address of the IP router, refer to the product’s documentation.

CONNECTING THE CAMERA DIRECTLY TO A DHCP- BASED XDSL/CABLE MODEM

p tu d Seanno ecti nn krCo ●twNe

	xDSL또는or	INTERNET
		External Remote PC
	CableModem
SNB-3000	모뎀

DDNS 서Server버 (DataCenter,KOREAKOREA)

Setting the IP Router

This is enabled for a modem using DHCP.

1.Set the Static or Dynamic IP address. (pages 36~41)

2.Launch an Internet browser on the local PC connected to the IP Router.

3.Enter the IP Router’s address in the address bar of the browser. ex) http://192.168.1.1, http://192.168.0.1

or http://192.168.xxx.1

 For the DDNS URL address, refer to "To check the DDNS address". (page 43)

English _33