Westell Technologies 7400, 7401 manual Configuring Static IP on Your PC

Models: 7401 7400

1 153
Download 153 pages 48.16 Kb
Page 55
Image 55
12.1.4 Configuring Static IP on Your PC

User Guide

UltraLine Home DSL Router (Models 7400, 7401)

STOP! After you disable Single Static IP, you must reboot your computer.

12.1.4 Configuring Static IP on Your PC

If you have static IP service (your Internet Service Provider [ISP] supplies static IP addresses), you will need to perform the following steps to obtain Internet access:

1.Configure your PC settings to obtain an IP address automatically. (Refer to your Windows Help screen for instructions.)

2.Follow the instruct ions in section 8 (Configuring the Router for Internet Connection).

3.View the settings at the VPI/VCI screen (section 8). You must use the VPI/VCI values that you obtained your from your Internet service provider If you type any other values in the fields and click on next, you will lose your DSL connection. The connection cannot be restored until you enter the proper VPI/VCI values that you obtained for your ISP

4.Select the Configuration menu, and then select Advanced WAN > VC.

5.Click on the edit button in the row that displays the VPI/VCI that you obtained from your ISP (section 8). The VC 1 Configuration screen will be displayed.

6.Select Bridge from the list of Protocol options. Next, under the VC 1 Bridge Settings, select Routed Bridge as the Mode.

7.Disable DHCP Client (if enabled) by clicking on the Disable radio button adjacent to DHCP Client.

030-300381 Rev. A

55

January 2004

Page 55
Image 55
Westell Technologies 7400, 7401 manual Configuring Static IP on Your PC