Westell Technologies 7400, 7401 manual Adding NAT Services to a Profile

User Guide UltraLine Home DSL Router (Models 7400, 7401)

12.2.1 Adding NAT Services to a Profile

This section explains how to add NAT services to your NAT service profile. Remember, you may attach an unlimited number of NAT services to your profile.

NOTE: Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your Router are open and that the required application traffic can pass through your LAN. For a list of supported NAT services, go to section 16 (NAT Services).

To add a NAT service, select Services from the Configuration menu. Next, Select a NAT service from the options provided at the Service Name drop-down arrow and click on enable.

If you clicked on enable, the following Host Service screen will be displayed. Click on OK. This will load the new NAT Configuration and the settings will be saved automatically.

If you clicked on OK in the preceding pop-up screen, the Host Device screen will be displayed. The Host Device screen will allow you to select which device will host the NAT service you selected on your local area network. You must either select the device from the Host Device drop-down arrow or type an IP address in the field labeled IP Address. Click on done.

030-300381 Rev. A 57 January 2004