Westell Technologies 7400, 7401 manual Connection via USB

User Guide UltraLine Home DSL Router (Models 7400, 7401)

Figure 2. Connection via USB

NOTE: The Router features shown in Figure 2 apply to the Model 7400 product. The Model 7401 product has only an Ethernet interface.

6.4.3Installation via 10/100 Base-T Ethernet and USB Simultaneous Installation (Model 7400)

Model 7400 supports simultaneous use of 10/100 Base-T Ethernet and USB ports. The following instructions explain how to install your Router for simultaneous use of Ethernet and USB ports.

NOTE: Refer to Figure 1 and Figure 2 for instructions on hardware installation via Ethernet and USB connections.

~

1.Connect the power supply cord to the power connector marked 12V on the rear panel of the Router. Plug the other end of the power supply into a wall socket.

2.Connect the DSL phone cable from connector marked on the rear panel of the Router to the DSL-equipped telephone line jack on the wall. You must use the phone cord that was provided with the kit.

030-300381 Rev. A 15 January 2004