User Guide | UltraLine Home DSL Router (Models 7400, 7401) | |
|
|
|
DHCP Server | This setting allows the ADSL router to automatically assign IP addresses to | |
| local devices connected on the LAN. Westell advises setting this to enabled for |
|
| the private LAN. |
|
| Off = DHCP Server is disabled |
|
| Private LAN = DHCP addresses will be saved into the Private LAN |
|
| configuration. |
|
| Public LAN = DHCP addresses will be saved into the Public LAN |
|
| configuration. This option is only available if the Public LAN DHCP server is |
|
| enabled. |
|
| NOTE: These addresses will be overwritten if the Internet Service Provider |
|
| supports dynamic setting of these values. |
|
DHCP Start Address | Factory Default = 192.168.1.15 |
|
| This field displays the first IP address that the DHCP server will provide. The |
|
| DHCP Start Address must be within the IP address and lower than the DHCP |
|
| End Address. You may use any number from 0 to 254 in this address. |
|
DHCP End Address | Factory Default = 192.168.1.47 |
|
| This field displays the last IP address that the DHCP server will provide. The |
|
| DHCP End Address must be within the IP address and higher than the DHCP |
|
| Start Address. You may use any number from 0 to 254 in this address. |
|
DHCP Lease Time | Factory Default = 01:00:00:00 |
|
| Displays the amount of time the provided addresses will be valid, after which |
|
| the DHCP client will usually |
|
| NOTE: DHCP Lease Time is displayed in the format (dd:hh:mm:ss)*. This |
|
| value must be greater than 10 seconds. Seconds must be between 0 and 59, |
|
| minutes must be between 0 and 59, and hours must be between 0 and 23. |
|
| *(dd = days, hh = hours, mm = minutes, ss = seconds) |
|
12.4.3 Disabling the DHCP Server
If you click on the
If you want to disable your DHCP server, select Off from the DHCP Server
70 | January 2004 |
