
User Guide | UltraLine Home DSL Router (Models 7400, 7401) |
3.Connect the yellow Ethernet cable from any one of the Ethernet jacks markedon the rear panel of the Router to the Ethernet port on your computer. Repeat this step to connect up to three additional PCs to the
Router.
NOTE: You may connect to any of the four Ethernet jacks on the rear panel of the Router as they serve as an Ethernet switch.
4.Connect the blue USB cable from the blue USB connector marked on the rear panel of the Router to the USB port on the PC.
5.Check to see if the DSL/RDY LED is solid green. If the DSL/RDY LED is solid green, the Router is functioning properly.
6.Check to see if the Ethernet LED (on the back of the unit) lights solid yellow or solid green. Solid green indicates the Ethernet connection is functioning properly in 100
Congratulations! You have completed the simultaneous hardware (Ethernet and USB) installation for Model 7400. You must now go to section 7 to begin the USB driver software installation. (No software installation is required when using only an Ethernet connection.)
16 | January 2004 |