User Guide | UltraLine Home DSL Router (Models 7400, 7401) |
If you changed the VPI/VCI settings and clicked on done in the SET-UP COMPLETE screen, the following screen will appear. Click on OK.
NOTE: The following pop-up will appear only if you have changed the VPI, VCI, or Protocol values in the preceding screens. If you did not change any of these values, this pop-up screen will not appear and the Router will not be reset. If your Router’s connection setting is set to “Always On” and you have changes any of these values, the Router will reset automatically. For instructions on editing your connection settings, see section 10.2.
If you clicked on OK, the following screen will be displayed. The Router will be reset and the new configuration will take effect. Next, proceed to section 8.2 to confirm your DSL sync.
030-300381 Rev. A | 34 | January 2004 |
