Westell Technologies 7400, 7401 manual Vpi

User Guide UltraLine Home DSL Router (Models 7400, 7401)

For example, if you selected the Bridge protocol, the following screen will be displayed. Select a mode from the options listed in the Mode drop-down arrow under VC 1 – Bridge Settings.

	VC 1 Configuration
VPI	This setting allows you to change your VPI (Virtual Path Indicator) value for a
	particular VC, which is defined by your Service Provider.
VCI	This setting allows you to change your VCI (Virtual Channel Indicator) value for a
	particular VC, which is defined by your Service Provider.
PCR	Factory Default = 100%
	Peak Cell Rate (PCR)-The maximum rate at which cells can be transmitted across a
	virtual circuit, specified in cells per second and defined by the interval between the
	transmission of the last bit of one cell and the first bit of the next.
	This value is a percentage of the current data rate.
	100 allows this VC to use 100% of the available bandwidth.
	80 allows this VC to use 80% of the available bandwidth.
QoS	Quality of Service, which is determined by your Service Provider.
	CBR = Constant Bit Rate
	UBR = Unspecified Bit Rate
	VBR = Variable Bit Rate
Protocol	The Protocol for each VC, which is specified by your Service Provider.
	PPPoA = Point to Point Protocol over ATM (Asynchronous Transfer Mode)
030-300381 Rev. A	89	January 2004