Rest Mode

Rest Mode

When Rest Mode is switched On, the following settings are switched Off:

Ice Maker

Acoustic Signal

Interior Light

Messages in the Display Panel

The background illumination of the Display Panel is reduced

Buttons are locked.

Switching On

1.Press and hold down the SUPER Button ³.

2.Press the VACATION Button ¶.

3.Press the SUPER Button ³ and hold down for a further 3 seconds.

The “VACATION” symbol flashes on the Display Panel and “RESTMODE” is displayed.

Switching Off

Press the VACATION Button ¶.

The previous settings and temperature values are once again activated.

Energy Saving Mode

If the Energy Saving Function (Eco Function) is activated, the appliance switches to the Energy Saving Operation. This Energy Saving Function is preset

at the factory in order to reduce energy consumption. The background illumination of the Display Panel is likewise reduced.

Switching On

1.Press the SETUP Button μ.

2.Press the Selection Button ¿, until “ECO MODE” and the current setting (OFF) is displayed.

3.Press the Setting Button @, in order to reset the setting.

4.Press the SETUP Button μ, in order to store the setting.

“ECO” is displayed on the Display Panel.

Switching Off

1.Press the SETUP Button μ.

2.Press the Selection Button ¿, until “ECO MODE” and the current setting (ON) is displayed.

3.Press the Setting Button A, in order to reset the setting.

4.Press the SETUP Button μ, in order to store the setting.

Alarm Function

Door Alarm

The Door Alarm switches On if an appliance door is left open for longer than three minutes. Close

the door to switch Off the Warning Signal.

Temperature Alarm

The Temperature Alarm switches On if the Freezer Compartment is too warm and the frozen food is at risk of thawing.

The set temperature of the Freezer Compartment flashes and “ALARM” is displayed on the display panel.

When the ALARM button ± is pressed,

the temperature display for the Freezer Compartment indicates for five seconds the warmest temperature reached in the Freezer Compartment.

Then this value is deleted. The temperature display for the Freezer Compartment indicates the set Freezer Compartment temperature without flashing.

Henceforth the “warmest temperature” will be redefined and saved.

The alarm display goes out as soon as the set temperature has been reached again.

The alarm may switch on without any risk to the frozen food:

when the appliance is switched On,

when large quantities of fresh food are placed in the appliance,

if the Freezer Compartment Door is open too long.

Switching Off the Alarm

Press the ALARM button ± to switch Off the Warning Signal.

12

Page 12
Image 12
Gaggenau RF 411 manual Rest Mode, Energy Saving Mode, Alarm Function Door Alarm, Temperature Alarm, Switching Off the Alarm