Ice and Water Dispenser Controls
Water Dispense Button.
Ice Cube Dispense Button.
Crushed Ice Dispense Button.
Lock Button for the Ice and Water Dispenser Control Panel (childproof lock).
To lock and unlock, hold down the button for 3 seconds.
Switch light with low brightness On and
Off.
Switch light with full brightness On and off.
Switching the Appliance On
Switch the appliance On with the POWER Button ÿ.
The appliance begins to cool. Light turns on when the door is open.
,CAUTION:
Keep hands and fingers away from front and rear openings of the freezer door or freezer drawer when closing. Risk of injury to hands or fingers.
Never allow children to climb on or play with the freezer door.
Operating Tips
▯When the appliance has been switched on, it may take several hours until the set temperature is reached.
▯The fully automatic No Frost system ensures that the Freezer Compartment remains free of ice. Defrosting is not required.
Setting the Language
The Display Languages can be changed according to the table in the chapter “Special Functions”, section “Setup Mode”.
To change the Display Language:
1.Press the SETUP Button μ.
2.Press the ¾ or ¿ Selection Button, until the set language is displayed.
3.Press the @ or A Setting Button, until the desired language is displayed.
4.Press the SETUP Button μ, in order to store the settings.
The set temperature is displayed again on the Display Panel.
Setting the Temperature Unit
The temperature can be displayed in degrees Celsius (°C) or degrees Fahrenheit (°F).
1.Press the SETUP Button μ.
The first menu (Temperature Unit) is displayed.
2.Press the @ or A Setting Button in order
to switch between degrees Fahrenheit (°F) and degrees Celsius (°C).
3.Press the SETUP Button μ, in order to store the settings.
The set temperature is displayed again on the Display Panel.
Setting the Temperature
Freezer Compartment
(can be selected from +7 °F
We recommend a setting of 0 °F
1.Press the ¾ Selection Button.
2.Set the temperature with the @ (warmer) or A (cooler) Setting Buttons.
10
