Light (LED)

3.Thoroughly rub the Ice Cube Container and Rotating Metal Screw (for appliances with Agitation or Dispensing Function) dry so that new ice cubes cannot freeze to them.

4.Insert Ice Cube Container and push back until it engages. If the Ice Cube Container cannot be pushed all the way back, twist the Rotating Metal Screw in the Ice Cube Container.

Ice cube production continues.

Light (LED)

Your appliance features a maintenance-free LED Light.

These lights may be repaired by Customer Service or authorized technicians only.

Tips for Saving Energy

Install the appliance in a dry, well ventilated room! The appliance should not be installed in direct sunlight or near a heat source (e.g. radiator, cooker).

If required, use an insulating plate.

Do not block the Ventilation Openings in the appliance.

Allow warm food and drinks to cool down before placing in the appliance!

When thawing frozen products, place them

in the refrigerator. Use the coldness of the frozen food to cool food.

Open the appliance as briefly as possible!

Operating Noises

Normal Noises

Droning

Motors are running (e.g. refrigeration units, fan).

Bubbling, humming or gurgling noises

Refrigerant is flowing through the tubing or water is flowing into the Ice Maker.

Clicking

Motor, switches or solenoid valves are switching On/ Off.

Rumbling

Ready ice cubes from the Ice Maker are falling into the Ice Cube Container.

Preventing Noises

The appliance is not level

Please align the appliance with a spirit level. Use the Height-Adjustable Feet or place packing underneath them.

The appliance is not free-standing

Please move the appliance away from adjacent units or appliances.

Containers or Shelves wobble or stick

Please check the removable parts and re-insert them correctly, if required.

Bottles or containers are touching each other

Move the bottles or containers slightly away from each other.

21

Page 21
Image 21
Gaggenau RF 463 Light LED, Tips for Saving Energy, Operating Noises Normal Noises, Preventing Noises, Droning, Clicking