Program selection, Presettings Programs

Instructions for the User

4.3Program selection

This oven has 10 different cooking programs, including:

2 preset programs (P1 – P2);

6 user-editable programs for humidified fan-mode cooking (P3 to P8),

1 preheating program with user-editable temperature and start and end time (P9),

1 "easy" editable program for humidified fan-mode cooking (P10).

The following table shows the parameters for each program.

	Uprh	Ut °C	U Ct	Program	H2O
	preheating	cooking	cooking	start/end
	temperature	temperature	time	time

P1	210 °C	210 °C	18	N/A	5,0
			minutes

P2	240 °C	240 °C	9	N/A	5,0
			minutes

P3	Editable	Editable	Editable	N/A	Editable

P4	Editable	Editable	Editable	N/A	Editable

P5	Editable	Editable	Editable	N/A	Editable

P6	Editable	Editable	Editable	N/A	Editable

P7	Editable	Editable	Editable	N/A	Editable

P8	Editable	Editable	Editable	N/A	Editable

P9	Editable	N/A	N/A	Editable	N/A

P10	Same as edited	Editable	Editable	N/A	Editable
	Ut°C

4.4Presettings Programs

The first two program selector knob settings are for the presetting cooking mode programs.

Use the knob to select one of the preset programs (P1–P2).

The display shows the parameters of the selected program (cooking time; temperature in degrees Centigrade, program number and steam percentage in the cooking chamber, e.g.P1).

Press START to confirm the start of the program.

The program starts, performing the preheating stage; the display shows “PrEh”.

When the preheating is complete, a "BEEP" sounds to indicate that cooking can start.

Press START to start cooking.

(If START is not pressed after the beep, the temperature is held constant for about 10 minutes, after which it will start to drop for a period up to a maximum time of 20 minutes, counted from when the beep sounded. After