Instructions for the User
4.5Editing / saving a program
The oven has 38 programs that can be modified by the user (from P01 to
P38). To set the operational parameters of a program:
•Turn the knob to the 
or 
symbols to select the program you wish to save / edit.
•Keep the “PUSH” knob pressed for 3 seconds: the display will show the cooking temperature.
•Turn the knob to the 
or 
symbols to set the cooking temperature.
•Press the “PUSH” knob: the display will show the cooking time.
•Turn the knob to the 
or 
symbols to set the cooking time (from 1 to 99 min).
•Only on the steam model, press the “PUSH” knob; the display will
show the “H00” humidification cycle. Turn the knob to the 
or 
symbols to set the humidification from “H00” to “H10”.
•Press the “PUSH” knob to exit from the data setting and saving phase. The message “PEnd” will appear on the display and the parameters will be saved.
•After 3 seconds the display will show the parameters set in rotation.
•To return to the “OFF” condition keep the “STOP” button pressed for 4 seconds.
30