Instructions for the User
4.6Running a program
From the “OFF” status proceed as follows:
•Turn the knob to the 
or 
symbols to select one of the available programs from P01 to P38. The display will show the parameters of the selected program in rotation.
•To start the program press the “START” button. The appliance will perform a preheating cycle, showing the message “PrEh” on the display.
•When preheating is finished, a series of beeps lasting 3 seconds indicate that is possible to proceed with the cooking operation. The message “PrEh” will flash on the display.
•To start the cooking, keep the “START” pressed for 2 seconds. The display will show, in order, the temperature set, the time remaining until the end of cooking and the program selected.
•It is possible to start the cooking early before the preheating temperature is reached, by keeping the “START” button pressed for 3 seconds.
•During the last minute of cooking, only the countdown of the remaining 60 seconds will be displayed. At the end, a beep and the text “End” flashing (for 20 minutes) will indicate that the cooking has been completed.
•To return to the “OFF” condition keep the “STOP” button pressed for 4 seconds.
During cooking, if it is necessary to open the oven door, the display shows the message “door” together with a continuous acoustic signal. When the door is closed the oven will continue cooking.
31