Preheating with delayed start, Rapid cooling

Instructions for the User

4.8Preheating with delayed start

The program with delayed pre-heating is set as follows:

•Turn the knob to the or symbols to select the program “P39”.

•Press the “PUSH” button for at least 3 seconds; the display shows the current hour flashing.

•Turn the knob to the or symbols to set the current hour.

•Press the “PUSH” button; the display will show the minutes flashing.

•Turn the knob to the or symbols to set the minutes.

•Press the “PUSH” button; the display will show the temperature flashing.

•Turn the knob to the or symbols to set the temperature.

•Press the “PUSH” button; the display will show the cooking start hour.

•Turn the knob to the or symbols to set the cooking start hour.

•Press the “PUSH” button; the display will show the minutes flashing.

•Turn the knob to the or symbols to set the minutes.

•Press the “PUSH” button to exit from the data setting and saving phase. The text “PEnd” appears on the display and after 3 seconds it will display P39, the temperature and the pre-heating start time in succession.

•To start the program press the “START” button for at least 2 seconds. The display will show the current time and “P39A” in succession until the program is activated at the set time.

The oven will perform preheating at the set time; during this phase the display shows “P39”, the text “InF” and the set temperature in succession; this will continue until interrupted by the “STOP” button.

The program must be activated every day. To reactivate it press the “START” button for at least 2 seconds.

4.9Rapid cooling

The oven is equipped with a special function that allows the oven interior to be cooled rapidly.

To activate it, when the display shows the text “OFF”, open the door and press the “START” button for at leasts 4 seconds.

This will activate the internal motor fan, the heating elements are switched off and the display shows the text “ - - - - “.

To stop the function, press the “STOP” button.