Switching the | Before the first use of the appliance first plug the | |
appliance ON/OFF | power cable into the wall socket. Display indicates | |
|
| dashes for both the refrigerator and the freezer. |
|
| • Switch the appliance on/off by pressing the |
|
| button A for 3 seconds. Both the refrigerator and |
|
| the freezer are started, green signal lamps B |
|
| and D are on. In this mode you can switch off |
|
| the refrigerator only by pressing button C for 3 |
|
| seconds (green signal lamp 2 is off). |
|
| • Display indicates temperature in the refrigerator |
|
| +9°C and in the freezer 0°C. These values remain |
|
| on the display until the actual temperature within |
|
| the respective space falls below these values. |
|
| • The appliance has been preset in the factory to |
|
| the recommended temperatures of the refrigerator |
|
| to +5°C and freezer to |
Temperature setting Temperature setting range of the refrigerator: +1°C do +9°.
Temperature setting range of the freezer:
•Freezer temperature is set by pressing button K, and refrigerator temperature by pressing button M.
•After pressing the temperature setting button the display starts flashing and indicates the last selected setting.
•Temperature setting is changed by short consecutive pressing of the button in 1°C steps. During the setting procedure all other buttons are idle.
•Approximately 5 seconds after the setting button is released the display indicates the actual temperature.
142468
18