Installation and connection
Selecting the location | • Place the appliance in dry and well aired room. | ||||
|
|
| The appliance operates best at temperature | ||
|
|
| ranges indicated in the chart below. Relevant | ||
|
|
| class of the appliance is indicated on the rating | ||
|
|
| plate. |
| |
|
|
|
|
| |
|
| Class |
| Ambient temperature | |
|
|
|
|
| |
|
| SN (subnormal) |
| from +10°C to +32°C | |
|
|
|
|
| |
|
| N (normal) |
| from +16°C to +32°C | |
|
|
|
|
| |
|
| ST (subtropical) |
| from +18°C to +38°C | |
|
|
|
|
| |
|
| T (tropical) |
| from +18°C to +43°C | |
|
|
|
| ||
| Positioning the appliance requires two persons in | ||||
Positioning the | |||||
appliance | order to avoid injuries or damage to the appliance. | ||||
| • Place the appliance flatly and firmly on a solid | ||||
| |||||
|
|
| base. The appliance is fitted with adjustable feet | ||
|
|
| on the front side, used to level the appliance. | ||
|
|
| Rear side of the appliance is fitted with wheels | ||
|
|
| (certain models only) facilitating the positioning of | ||
|
|
| the appliance at the preselected place. | ||
| • The element above the appliance must be at | ||||
| |||||
|
|
| least 5 cm away to allow sufficient cooling of the | ||
| • | condenser. |
| ||
| Avoid exposing the appliance to direct sunlight | ||||
|
|
| or heat sources. If this is not possible, install | ||
|
|
| insulation plate between the appliance and | ||
| • | adjacent heat source. |
| ||
| Bottom front corners of the appliance is fitted with | ||||
handles to facilitate moving. The appliance may stand independently or adjacent to a furniture element or wall. Be sure to leave enough space for the opening of the door, to avoid damage to the appliance or personal injury. Also leave ample space for extracting shelves (see installation diagram).
142468
7