Sub-Zero Freezer D E Pa N E L I N S Ta L L At I O N O P T I O N S, 24 1/ 4

Page 20

COMPLETING T H E I N S TA L L AT I O N

SIDE PANEL I N S TA L L AT I O N

If you’re installing a Built-In model with side panels, check with your installer or use one of the following Side Panel Installation Options.

Drill three holes equidistant in a vertical section of the aluminum frame, and install pan head screws. Do not drill through model and serial number plate. Anchor the side panel with decorative screws or finishing nails from a local hardware store. Do not use adhesives. Refer to illustration 16 below.

The dimensions given in the Side Panel Installation Options are for typical wood side panels. If a 1/4" (6) thick or less panel is used and inserted into the return channel extrusion, then a 241/4" (616) wide panel is necessary. In this application, the panel must be notched for the grille and other brackets or screws that are in the return channel. Toe kick cut-outs will be necessary for all side panel applications. Refer to illustration 17 below.

IMPORTANT NOTE: The use of side panels may change the width of your rough opening.

IMPORTANT NOTE: The overall height on the side panel will vary with the height of the grille being used. Make sure you know your finished height before cutting any panels.

S I D E PA N E L I N S TA L L AT I O N O P T I O N S

1/4" (6) THICK SIDE PANEL FITTED IN TO UNIT FRAME

DOOR

PAN HEAD SCREW

1/8" (3) THICK BATTENS

 

 

 

 

 

SIDE OF SUB-ZERO UNIT

FRAME

1/4" (6) SIDE PANEL MATERIAL

 

 

241/4" (616)

 

1/4" (6) THICK SIDE PANEL FITTED UP TO UNIT FRAME

DOOR

PAN HEAD SCREW

 

1/4" (6)

 

1/8" (3) THICK BACK-UP

THICK BATTENS

 

 

SIDE OF SUB-ZERO UNIT

FRAME

1/4" (6) SIDE PANEL MATERIAL

 

 

24" (610)

 

3/8" (10) THICK SIDE PANEL FITTED UP TO UNIT FRAME

DOOR

PAN HEAD SCREW

1/8" (3) THICK BATTENS

 

 

 

 

 

SIDE OF SUB-ZERO UNIT

FRAME

3/8" (10) SIDE PANEL MATERIAL

 

 

24" (610)

 

1/2" (13) THICK SIDE PANEL FITTED UP TO UNIT FRAME

DOOR

PAN HEAD SCREW

 

 

 

FRAME 1/8" (3) ROUT

 

 

 

 

SIDE OF SUB-ZERO UNIT

DOOR

PAN HEAD

11/8"SCREW

(29)

FRAME

SIDE PANEL

Illus. 16

20

131/4" (337)

1/4" (6)

 

1/4" (6)

 

3" (76)

3" (76)

4" (102)

Illus. 17

21/2" (64) 1/2" (13) SIDE PANEL MATERIAL 24" (610)

METAL SIDE PANEL FITTED UP TO UNIT FRAME

DOOR PAN HEAD SCREW

SIDE OF SUB-ZERO UNIT

FRAME METAL SIDE PANEL MATERIAL

24" (610)

Top Views

Dimensions in parentheses are in millimeters unless otherwise specified.

Image 20
Contents Installation Instructions N T E N T S To O L S a N D M AT E R I a L S R E Q U I R E D T E P R E P a R AT I O N BUILT-INI N S TA L L AT I O N S P E C I F I C AT I O N S E R a L L D I M E N S I O N SL R E F R I G E R ATO R a L L F R E E Z E R S TA L L AT I O N S P E C I F I C AT I O N SModel D E RModel Model 611G Model 650G D E B Y- S I D E Dimensions in parentheses are Grille R E M O V a L Models 601R, 601RG and 601F-framedBUILT-INI N S TA L L AT I O N I N S T R U C T I O N S ANTI-TIPB L O C K I N G K I T Position T H E U N I TTurn power back on to the wall outlet Level T H E U N I TFramed P a N E L S A M E D N E L SFramed Panel I N S TA L L AT I O N I S E D PA N E L S PA RT I a L F R a M E D a C C E S S O RY K I TA M E D R E T RO F I T a C C E S S O RY K I T PA N E L S I G NFramed Panel S P E C I F I C AT I O N S A M E D D O O R PA N E L SA M E D PA N E L S Model 601RA M E D N E L S PA RT I a L F R a M E D D O O R PA N E L SN E L G R I L L E O P T I O N E R L AY N E L S Overlay Panel I N S TA L L AT I O N Overlay P a N E L SOverlay Panel I N S TA L L AT I O N Overlay Grille PA N E L SE R L AY PA N E L S Overlay Panel S P E C I F I C AT I O N SE R L AY D O O R PA N E L S E R L AY G R I L L E P a N E L S D E PA N E L I N S TA L L AT I O N O P T I O N S 24 1/ 4Completing T H E I N S TA L L AT I O N Anchor T H E U N I T O U N I T S a N C H O R E D to G E T H E RI T a N C H O R E D to C a B I N E T RY Hinge a D J U S T M E N TInstallation C H E C K L I S T Completing T H E I N S TA L L AT I O N E G R E E Door StopService I N F O R M AT I O N Mail Address customerservice@ subzero.comS TA L L AT I O N C H E C K L I S T N TA C T F O R M AT I O N0 0