Gladiator Garageworks W10131407A Upper Compartment Features, Lower Compartment Features, Shelves

Page 9

Give your convertible refrigerator/freezer time to cool down completely before adding food. It is best to wait 24 hours before you put food into the convertible refrigerator/freezer.

If you add food before the convertible refrigerator/freezer has cooled completely, your food may spoil. Adjusting the Lower and Upper Compartment Controls to a colder than recommended setting will not cool the compartments any faster.

Adjusting Controls

The settings indicated in the previous section should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

If the temperature is too warm or too cold in the lower or upper compartment, first check the air vents to be sure they are not blocked.

If you need to adjust temperatures, use the settings listed in the chart below as a guide. Wait at least 24 hours between adjustments and then recheck the temperatures.

CONDITION/REASON:

ADJUSTMENT:

 

 

LOWER COMPARTMENT section

Adjust LOWER

too warm

COMPARTMENT Control

- Door opened often, large amount

toward coldest.

of food added or room temperature

 

very warm

 

 

 

UPPER COMPARTMENT section

If in Refrigerator Mode,

too warm

adjust UPPER

- Door opened often, or large

COMPARTMENT Control

amount of food added or very cold

toward coldest.

room temperature (can’t cycle often

If in Freeze mode, adjust

enough)

LOWER COMPARTMENT

 

Control toward coldest.

 

 

LOWER COMPARTMENT section

Adjust LOWER

too cold

COMPARTMENT Control

- Controls not set correctly for your

toward cold.

conditions

 

 

 

UPPER COMPARTMENT section too

If in Refrigerator Mode

cold

adjust UPPER

- Controls not set correctly for your

COMPARTMENT Control

conditions

toward cold.

 

If in Freeze mode, adjust

 

LOWER COMPARTMENT

 

Control toward cold.

UPPER COMPARTMENT

FEATURES

Upper Compartment Shelf

To Remove and Replace the Shelf:

1.Remove the shelf by lifting the entire shelf slightly and moving it all the way to the left-hand side. Tilt the right-hand side up and out of the shelf supports.

2.Replace the shelf by inserting the left-hand end all the way into the shelf supports. Then, lower the right-hand end of the shelf and insert it into the shelf supports.

NOTE: The shelf should lower slightly and lock into place. If the shelf does not appear stable, make sure both ends of the shelf are inserted into the shelf supports.

Upper Compartment Floor

To Remove and Replace the Upper Compartment Floor:

1.Remove all items from the compartment floor.

2.Remove the floor by raising the front and lifting it out.

3.Replace the floor by inserting the two rear tabs into the holes in the rear of the lower compartment. Lower the floor onto the liner of the lower compartment.

LOWER COMPARTMENT

FEATURES

Shelves

For storage flexibility, the shelves in your convertible refrigerator/ freezer are adjustable. Adjust the shelves to different heights and store similar foods together. This reduces the time the door is open and saves energy.

Half-Width Shelf/Frame

To Remove and Replace a Shelf/Frame:

1.Remove the shelf/frame by tilting it up at the front and lifting it out of the shelf supports.

2.Replace the shelf/frame by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until rear shelf hooks drop into the shelf supports. Check to make sure that the shelf is securely in position.

Full-Width Shelf

To Remove and Replace the Shelf:

1.Remove all items from the shelf. Remove the shelf by raising the front and pulling it forward.

2.Replace the shelf by lifting the front while sliding the shelf back until it locks into place.

9

Image 9
Contents Table of Contents / Table des matières Convertible REFRIGERATOR/FREEZER SafetyUnpack the Refrigerator Installation InstructionsLocation Requirements Electrical RequirementsRecommended Grounding Method Convertible Refrigerator/Freezer Doors Door Swing Reversal optional Caster Installation Adjust the DoorsDoor Closing Align DoorsComplete the Assembly Convertible Using the ControlsNormal Sounds Ensuring Proper Air CirculationLower Compartment Features Upper Compartment FeaturesUpper Compartment Shelf Upper Compartment FloorWire Door Shelf Door FeaturesBaskets Door RailsFreezer Care Moving TroubleshootingLights do not work There is water in the defrost drain panUpper compartment front liner is warm Temperature is too warmThere is interior moisture buildup Doors are difficult to openGladiator Garageworks Major Appliance Warranty Avertissement Déballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Méthode recommandée de mise à la terreSpécifications électriques Portes du réfrigérateur/congélateur convertible Inversion du sens douverture de la porte option Ajustement des portes Installation des roulettesFermeture des portes Alignement des portesÉcrou indesserrable Charnière supérieure Charnière centraleBride de roulette Roulette Vis de réglage de nivellement ne pas enleverUtilisation DU Réfrigérateur Utilisation des commandesSons normaux Pour assurer une circulation dair correcteCaractéristiques DU Tablette du compartiment supérieurFond du compartiment supérieur Tablettes PaniersGuide de stockage des aliments surgelés Caractéristiques DE LA Porte Pannes de courant Remplacement des ampoules d’éclairageEntretien avant les vacances ou lors d’un Déménagement VacancesDépannage Fonctionnement du réfrigérateurTempérature et humidité Garantie Limitée DE UN AN Garantie DES Gros Appareils Ménagers Gladiator Garageworks

W10131407A specifications

The Gladiator Garageworks W10131407A is a versatile and innovative storage solution designed for modern garages and home workspaces. As a part of the Gladiator line, this product exemplifies robust construction and efficient design—attributes that are crucial for organizing tools and gear neatly.

One of the key features of the W10131407A is its durable construction. Made from high-quality steel with a powder-coated finish, the unit is designed to withstand the rigors of a busy garage environment. This heavy-duty build not only enhances longevity but also ensures easy maintenance, as the surface can be easily cleaned without fear of rust or corrosion.

The W10131407A utilizes a modular design, allowing users to customize their storage space according to their specific needs. This flexibility is crucial for maximizing efficiency in any workspace. The unit includes adjustable shelving that can accommodate items of various sizes, from tools and equipment to seasonal items. This adaptability is complemented by a locking mechanism that adds an extra layer of security, keeping valuable tools safe from unauthorized access.

Furthermore, the W10131407A is designed with convenience in mind. Its ergonomic layout ensures items are easily accessible, reducing the time spent searching for tools. The inclusion of integrated handles facilitates smooth opening and closing, enhancing user experience significantly. The appliance also features a clean and attractive appearance, which makes it a stylish addition to any garage setup.

Technologically, the Gladiator Garageworks W10131407A integrates the latest advancements in storage solutions. It is compatible with the Gladiator EZ Design platform, allowing users to visualize their workspace and optimize their storage layout. Additionally, it can be easily integrated with other Gladiator products, promoting an organized and cohesive look throughout the garage.

Overall, the Gladiator Garageworks W10131407A stands out as an exemplary storage unit. With its sturdy construction, versatile modularity, ease of access, and compatibility with advanced design technologies, it provides an effective solution for those who seek to transform their garage into a well-organized and functional space. This product is perfect for DIY enthusiasts, homeowners, and anyone looking to elevate their garage’s storage capabilities.