Replacing

3.Hold the surface unit as level as possible with the terminal just started into the receptacle.

4.Push the surface unit terminal into the receptacle. When the terminal is pushed into the receptacle as far as it will go, the surface unit will fit into the reflector bowl.

CAUTION: Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat belter and look new longer.

If a reflector bowl gets dlscolored, some of the utensils may not be flat enough, or some may be too large for the surface unlt. In elther case, some of the heat that’s meant to go Into or around a utensll goes down and heats the reflector bowl. lhls extra heat can discolor R. See “Cooklng Gulde” for further lnformatlon.