3.Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5°F incre- ments. Use these pads until the desired temperature shows in the small display.
After you have set the desired temperature, the display will show the set temperature and the time of day. BAKE will light up.
4.Push the Cook Time pad. “0:OO”with the colon flashing and COOK TIME will show in the display.
5.Use the Hour and Minute pads to set the desired cooking time. Push the “up”(A) or “down” (V) pad(s) until the correct time shows in the display.
This example shows a desired baking/roasting time of 30 minutes.
6.Push the Start/Enter pad. “Lo”“,HEAT, BAKE, TIMED and the set cook time will show in the display to indicate that the oven is heating.
NOTE: The display will show “door”and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/roast.
You can change the temperature or time settings any time after pushing the Start/Enter pad by repeating just Steps 3 through 5.
7.The display will count down the baking/ roasting time in minutes.
6.When the baking/roasting time is completed, the oven will turn off automatically, beep four times and “End”will show in the display. You will also hear four
NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.
18