7.Use the Hour and Minute pads to set the desired stop time. Push the “up”(A) or “down” (V) pad(s) until the correct time shows in the display.
This example shows a desired stop time of 2:30. The oven will automatically start cooking at 2:00 (the set stop time minus the set cook time).
8.Push the Start/Enter pad. DELAY and BAKE will light up in the display to indicate that the oven is programmed to start at a later time.
NOTE: The display will show “door” and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/ roast.
You can change the temperature or time settings any time after pushing the Start/Enter pad by repeating just Steps 3 through 7.
9.When the start time is reached, a
10.When the baking/roasting time is completed, the oven will turn off automatically, beep four times and “End”will show in the display. You will also hear four
NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.
25