7.Use the Hour and Minute pads to set the desired stop time. Push the “up’ (A) or “down”
(V)pad(s) until the correct time shows in the
display.
This example shows a desired stop time of 2:30. This provides a cook time of 30 minutes (the difference between the start and stop times).
NOTE: Ii you do not set a stop time, the colon will flash in the display and STOP and COOK will flash afternatefy to remind you to program a stop time or a cook time. (See page 20 for instructions on how to set delay start and stop automatically using Cook Time and Start Time.)
8.Push the Start/Enter pad. DELAY and BAKE will light up in the display to indicate that the oven is programmed to start at a later time.
NOTE: The display will show “door” and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/roast.
You can change the temperature or time
settings any time after pushing the Start/Enter pad by repeating just Steps 3 through 7.
9.When the start time is reached, a
10.When the baking’roasting time is completed, the oven will turn off automatically, beep four times and “End”will show in the display. You will also hear four
NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.
To cancel the MEALTIMER” control setting:
l Push the Off/Cancel pad to return the display to the time of day.
23