6. After cleaning the gas tube opening and ports, replace the burner cap and burner grate. To replace burner cap, make sure cap is properly aligned and
Locating pegs
leveled. Fit locating pegs into the recess in the underside of the cap. The cap must be correctly seated on the burner body for proper operation of the burner.
7.Turn on the burner to determine if it will light. If the burner does not light after cleaning, contact an authorized Whirlpool service technician. Do not service the sealed burner yourself.
Removing the oven door
Removing the oven door will help make it easier to clean the oven,
Electrical Shock Hazard
Make sure all controls are OFF and the oven is cool before removing oven door.
Failure to do so could result in burns or electrical shock.
To remove:
1.Open the door to the first stop position.
2.Hold the door at both sides and lift it at the same angle it is in.
3.To replace, fit the bottom corners of the door over the ends of the hinges. Push the door down evenly. The door will close only when it is on the hinges correctly.
19