tf You Need Assistance Or Service
This section is designed to help you save the cost of a service call. Part 1 of this section outlines possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our Consumer Assistance Center for help or calling for service, please provide a detailed descrip- tion of the problem, your appliance’s complete model and serial numbers and the purchase date. (See page 2.) This information will help us respond properly to your request.
1. Before calling for assistance . . .
Performance problems often result from little things you can find and fix without tools of any kind. Please check the chart below for problems you can fix. It could save you the cost of a
mice call.
PROBLEM
Nothing will operate
POSSIBLE CAUSE
The power cord is not plugged into a live circuit with proper voltage.
Range is not properly con- netted to gas supply.
SOLUTION
Plug the power cord into a live circuit with proper voltage. (See installation Instructions.)
Contact an authorized Whirlpool@ service technician to reconnect range to gas supply. (See Installation Instructions.)
A household fuse has blown or a circuit breaker has tripped.
Replace household fuse or reset circuit breaker.
Controls are not set correctly. Reset controls, if needed.
The flow of combustion and/ Remove blockage to airflow to and or ventilation air to the range around range.
is blocked.
The oven will not operate
Burner fails to light
Burner flames are uneven
The Oven Temperature Control is not turned to a temperature setting.
The power cord is not plugged into a live circuit with proper voltage.
A household fuse has blown or a circuit breaker has tripped.
Burner ports are clogged.
Burner ports are clogged.
Push in and turn the Oven Temperature Control to a temperature setting.
Plug the power cord into a live circuit with proper voltage. (See Installation Instructions.)
Replace household fuse or reset circuit breaker. In case of prolonged power failure, manually light burners (see page 8).
Clean with a straight pin (see page 18).
Clean with a straight pin (see page 18). If this fails, call an authorized Whirlpool@ service technician for service.